M8 x 1.25 x 17 Single Banjo Bolt with 2 Copper Washers - BJO/BLT-12

M8 x 1.25 x 17mm single banjo bolt (BJO/BLT-12) with a hex head, made from carbon steel with a black zinc plated finish and supplied with 2 copper washers. It is a hollow, cross-drilled bolt for connecting a banjo fitting or hose end to a threaded port so that fluid can pass through the bolt. Sold as one bolt.

Key features

• Thread: M8 x 1.25 (metric), 8 mm thread length
• Below-head length: 17 mm, overall length 22 mm
• Material: Carbon steel, black zinc plated
• Cross-drilled: 4.3 mm cross-drill for fluid flow
• Includes: 2 x copper washers (one fitted each side of the banjo eye)
• Quantity: 1 banjo bolt
• Brand: Oxford Fasteners

Dimensions (all ±0.1 mm)

• Hex size (AF): 12 mm (±0.1 mm)
• Head length: 5 mm (±0.1 mm)
• Below-head length: 17 mm (±0.1 mm)
• Thread length: 8 mm (±0.1 mm)
• Overall length: 22 mm (±0.1 mm)
• Cross-drill diameter: 4.3 mm (±0.1 mm)

Thread M8 x 1.25; tolerance on every dimension is ±0.1 mm. Please check the thread, pitch and below-head length against your banjo fitting or port before ordering.

What is in the pack

• 1 x M8 x 1.25 x 17mm banjo bolt
• 2 x copper washers

Typical uses

Banjo bolts are commonly used to connect hoses and pipes on brake and clutch hydraulics, fuel lines and oil lines on cars, motorcycles, tractors and machinery. Check that the thread, pitch, length and the pressure and fluid rating are suitable for your system.

Fitting tips

• Fit one copper washer on each side of the banjo eye and use new washers whenever the bolt is refitted.
• Make sure the cross-drilled hole sits inside the banjo eye so fluid can flow.
• Tighten to the torque given by the vehicle, brake or hose manufacturer. Fitting by a competent person is recommended.