Categories

Male-to-female thread adapters, reducers, hex nipples, couplers and inserts in BSP, BSPT, NPT, UNF and metric threads - brass and BZP steel.

• Male to Female Thread Adapters151productsMale-to-female thread adapters (sump plug adapters) - convert any BSP, BSPT, NPT, UNF or metric port to another thread. Brass and BZP steel.
• Thread Reducers & Increasers0productsHex thread reducers and increasers (female-to-male) - e.g. M6 female to M8 male, M10 female to M12 male, BZP steel.
• Hex Nipples0productsHex nipples / threaded nipples - male-male, female-female and male-female in brass and BZP steel, BSP, UNF and metric.
• Threaded Couplers0productsThreaded coupling nuts / connector couplers - steel (metric, BSP, UNF, UNC, BSW, BSF, BSC) and brass.
• Fuel Tap Adapters0productsBrass petrol / fuel tap adapters (1/4" to 1/8", 3/8" to 1/4", 1/2" to 3/8" BSP) for classic British motorcycles - BSA, AJS, Ariel, Villiers.
• Threaded Inserts0productsSteel and stainless threaded inserts - RH and LH metric fine, BSP stainless inserts and flanged UNF inserts.

Banjo bolts, banjo eyes, brake pipe unions, blanking plugs, bleed nipples and master cylinder push rods - metric, UNF, BSP and BSF.

• Banjo Bolts22productsSingle, double and bleed banjo bolts in metric, UNF, UNC, BSP and BSC/CEI - BZP steel and stainless, for brake, clutch, oil and fuel lines.
• Banjo Eye Unions0productsBanjo eye unions / banjo fittings - plain, barbed, weld-on, long-tail and double, in BZP steel and brass.
• Brake Pipe Unions0productsBrake pipe unions / brake pipe nuts for 3/16" and 1/4" pipe - male and female, metric and imperial (3/8 UNF, 7/16 UNF, M10x1), BZP and brass.
• Brake Blanking Plugs0productsBrass brake pipe blanking plugs and caps - male and female, M8 to M12 and UNF.
• Bleed Nipples0productsBrake and clutch bleed nipples / bleed screws M4 to M10 and UNF.

Hose tails, barbed hose joiners, tees, elbows, olives, compression nuts, nut & spigot and bulkhead fittings in brass, steel and aluminium.

• Hose Tails0productsMale and female hose tails / hose barbs in BSP, NPT, UNF and metric threads - brass, steel and aluminium.
• Hose Joiners & Connectors0productsStraight and reducing barbed hose joiners, tees, Y and cross connectors in brass and BZP steel.
• Brass Elbows, Tees & Crosses0productsBrass threaded male elbows, 3-way tees and 4-way crosses in BSP sizes.
• Compression Olives & Nuts0productsBrass, steel and aluminium compression olives (barrel and step) and hydraulic compression nuts - metric and imperial.
• Nut & Spigot Fittings0productsFuel tap nut & spigot / hose tail connectors - straight and 90 deg, BZP and brass, BSP and UNF.

Oil drain plugs, magnetic sump plugs and brass / aluminium blanking plugs in metric, BSP, NPT and UNF threads.

• Oil Drain Sump Plugs0productsSteel and magnetic oil drain / sump plugs M8 to M22.
• Blanking Plugs0productsSolid and hollow brass and aluminium blanking plugs, and AN flare plugs.

Oil pressure gauge T-piece adapters, water temperature sensors, temperature sensor adapters and weld-on bungs.

• Oil Pressure Gauge Adapters0productsOil pressure gauge / sender T-piece adapters, steel and aluminium, M10 to M18 and NPT/BSPT to 1/8 NPT.
• Water Temperature Sensors0productsWater / coolant temperature sensors and senders M10 to M18 and BSP/BSPT, spade and bullet type.
• Weld-On Bungs0productsSteel weld-on bungs (lip and flange type) 1/16 to 3/8 NPT for sensors and drains.

Aluminium, steel, nylon, rubber, polyurethane and phosphor bronze bushes and spacers - ID x OD x length.

• Metal Spacers & Bushes0productsAluminium and BZP steel spacer bushes / sleeves and flanged (top hat) bushes.
• Nylon Bushes & Spacers0productsBlack and white nylon spacers / bushes and nylon top hat bushes.
• Rubber & Poly Bushes0productsRubber, metal-rubber (silentbloc), V-type shock absorber bushes and polyurethane bushes.
• Phosphor Bronze Bushes0productsSintered phosphor bronze (oilite type) plain and flanged bushes.

Rod end and misalignment spacers, step reducers, harness mounting plates and steering boss adapters for kit cars and racing.

• Rod End & Misalignment Spacers0productsMisalignment spacers for rod ends / heim joints - washer, male-female, collared, step reducer and cone types.

Half / lock nuts, full nuts, castle, dome, nyloc, wing, diff and wheel nuts - metric, UNF, BSP, BSF and BSC.

• Half, Lock & Jam Nuts0productsThin half / lock / jam nuts in BZP steel and brass, metric, UNF, BSP and BSC.
• Full Hex Nuts0productsFull hex nuts steel and brass, metric fine and BSC/CEI.
• Dome Nuts0productsDome / acorn nuts in stainless, steel, UNF and BSF.
• Nyloc Nuts0productsNylon insert lock (nyloc) nuts M4 to M12.
• Wheel Nuts0productsFord-fit, conical seat, classic Mini and trailer wheel nuts (M10, M12x1.5, 3/8 UNF, 7/16 UNF).

Copper, aluminium, fibre and Dowty sealing washers, countersunk, flat, domed, spring and taper washers.

• Sealing Washers0productsCopper, aluminium, fibre and Dowty bonded sealing washers - metric and imperial.
• Countersunk Washers0productsAnodised aluminium countersunk washers in multiple colours, M4 to M10.

Exhaust manifold studs, cylinder head and rocker studs, jack screws, J bolts, threaded rod, pins and pop rivets.

• Exhaust Manifold Studs0productsExhaust / carb manifold studs M6 to M10, UNC/UNF and BSF/BSC.
• Cylinder Head & Rocker Studs0productsCylinder head studs and rocker box studs (e.g. Royal Enfield Bullet).
• J Bolts0productsBattery J bolts (hook bolts) in pairs with screw or wing nuts.
• Pop Rivets0productsBlind pop rivets 1/8" (3.2mm) and other sizes, packs of 10 to 100.

Compression, extension, torsion and taper springs incl. motorcycle and scooter replacement springs.

• Compression Springs0productsCompression springs by wire dia x OD x length.
• Extension Springs0productsExtension / tension springs with hook ends.
• Torsion Springs0productsTorsion springs (left and right hand) incl. Lambretta lever/pedal springs.

Flat, slotted, angle and U brackets, alternator adjuster arms, exhaust brackets, battery clamps and hose clips.

• Mounting Brackets0productsUniversal steel mounting brackets - flat, slotted, angle, U type and exhaust.
• Battery Clamps0productsBattery hold-down clamps with or without J bolts.

Classic and Indian motorcycle parts - wheel spokes and nipples, cable stops and ferrules, brake switches.

• Wheel Spokes & Nipples0productsMotorcycle wheel spokes 8G/9G/10G and spoke nipples, packs of 4 to 36.
• Cable Stops & Ferrules0productsThrottle / brake / clutch cable stop ferrules, barrel nuts, adjuster screws and gear shifter nipples.

52mm/60mm/80mm dash gauges, speedometers, tachometers, hour meters, battery terminals and ignition switches.

• Dash Gauges2products52mm and 60mm 12V/24V dash gauges - volt, amp, oil pressure, water temp, fuel, battery and air.
• Speedometers0products80mm Smiths-style speedometers (MPH / KPH) for motorcycles and classics.
• Tachometers & Hour Meters0productsRPM meters (0-4000, 12V/24V) and quartz / LCD engine hour meters.
• Battery Terminals0productsHeavy duty brass/lead battery terminal clamps - L type, straight, wire type.
• Ignition & Starter Switches0productsIgnition / starter switches and starter solenoid relays (tractor applications).

PU air hose / polyurethane tube, recoil hose, quick release couplers and non-return valves.

• PU Air Tube & Hose0productsPolyurethane (PU) pneumatic tube by the metre and PU recoil air hose, multiple colours.

Lathe revolving and dead centres, tap wrenches, calipers, drill sleeves, chuck keys, toolmaker clamps and punches.

• Lathe Centres0productsMorse taper MT1-MT6 revolving live centres, bull nose centres and dead centres.
• Tap Wrenches0productsAdjustable tap wrenches 1/16" to 1.5".
• Calipers, Dividers & Compasses0productsSpring calipers (inside/outside), dividers and wing compasses 6" to 16".
• Toolmaker Clamps0productsToolmaker parallel clamps 3" to 8".
• Punches0productsAutomotive centre punches and pin / hollow punches 1.5mm to 25mm.

Parts grouped by vehicle / application - use as the 2nd eBay shop category.

• Classic Mini Parts0productsFittings and fasteners for the Classic Mini.
• Kit Car & Ford Parts0productsKit car, Ford, hot rod and BriSCA/Spedeworth oval racing fittings.
• Royal Enfield Parts0productsRoyal Enfield Bullet, Classic, Himalayan and 650 Twin parts.
• Triumph, BSA & British Bikes0productsClassic British motorcycle parts - Triumph, BSA, AJS, Norton, Ariel, Villiers.
• Lambretta & Scooter Parts0productsLambretta and scooter springs and parts.
• Tractor & Machinery Parts0productsTractor, lawnmower and machinery parts - Massey Ferguson, John Deere, Iseki.

Browse all parts by material - brass, BZP steel, stainless steel, aluminium, nylon, rubber/poly, copper/fibre and bronze.

• Aluminium Parts0productsAll aluminium parts from Oxford Fasteners, grouped by product type.
• Brass Fittings & Parts151productsAll brass fittings & parts from Oxford Fasteners, grouped by product type.
• Bronze Bushes & Parts0productsAll bronze bushes & parts from Oxford Fasteners, grouped by product type.
• Copper & Fibre Parts0productsAll copper & fibre parts from Oxford Fasteners, grouped by product type.
• Nylon Parts0productsAll nylon parts from Oxford Fasteners, grouped by product type.
• Rubber & Polyurethane Parts0productsAll rubber & polyurethane parts from Oxford Fasteners, grouped by product type.
• Steel & BZP Fittings & Parts0productsAll steel & bzp fittings & parts from Oxford Fasteners, grouped by product type.
• Stainless Steel Parts0productsAll stainless steel parts from Oxford Fasteners, grouped by product type.